Adjustable to nine constriction settings, these heavy-duty chokes allow you to select the proper choke for the type of shotgun shooting you’re doing. Based on the original Poly-Choke design, this new generation is fully adjustable from extra-full, to reverse choke and will handle all shotgun loads including lead slugs, heavy shot, and steel. Uses a unique, rotating method that gives you and audible “click” into place with clearly marked choke settings so finding just the right choke is simple and quick. No more fumbling around with a pocket full of choke tubes. Wrench included. SPECS: CNC machined high tensile steel. Blued. Available for vented Remington, Browning Invector, and Beretta/Benelli 12 gauge shotguns.
Lightweight aluminum or stainless steel followers for Remington, Mossberg, Benelli, and Browning shotguns. Tough construction holds up to years of competitive and law enforcement shooting and won’t wear out after thousands of rounds, break under spring pressure, or degrade when cleaning solvents are used. Bright colors let you see immediately if the magazine is empty. Vented design reduces weight to allow for smooth feeding. Stainless steel (SS) followers are natural finish. Aluminum followers are available in red, orange, green and black, depending on model and gauge. SPECS: Aluminum; Stainless Steel. Browning followers fit the A-5 only.
Machined steel magazine extensions increase capacity without gunsmithing or permanent alterations to your Remington 870, 1100 or 11-87 shotgun. Knurled, threaded collar screws onto the end of the mag tube. Includes high-performance, extended length magazine spring and an unbreakable, high-visibility, nylon follower. Loop models features a stationary loop on either the bottom or left side of the extension to accept direct attachment of tactical-style slings without swivels. QD stud models include a quick-detach, swivel stud mounted either in the center of the magazine cap or at the front of a plate below the extension to accept slings with quick-detach swivels. All models fit 12 gauge only. SPECS: Steel, gray parkerized finish. Fits Remington 870/1100/11-87, 12 ga. only. 1-Shot – 2″ (5cm) long, 2-Shot – 6″ (15.2cm) long.
If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our Special Line brushes is well worth it to eliminate any chance of the cleaning brush’s shank putting a scratch in that all-important barrel. The Brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch Brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. SPECS: Bristles: Phosphor bronze. Shank: Brass, looped and wound. Rifle: 3 ” (8.3cm) OAL except .17 cal., which is 2″ (5.1cm) OAL, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/Revolver: 2-1/8″ (5.4cm) OAL, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8″ (7.3cm) OAL, 5/16-27 thread. .22 M16 Rifle: 8-36 thread fits military M16 cleaning rods only.
This extension is currently available in +3 and +4 configurations for the 870, 1100, and 1187 shotguns. Manufactured to offer added shell capacity, this is one of the finest machined shotshell tubes currently available. Each tube offers an unique swirl style barrel nut that adding a distinctive look and sure grip.
Machined aluminum magazine plug with steel core installs in the magazine tube of your semi-auto or pump action shotgun to add weight where it’s needed-up front-to reduce muzzle jump and dampen felt recoil for speedy recovery and fast follow-up shots. Strategically positions the weight near the center of balance to prevent adverse effect on your gun’s handling characteristics, while improving gun swing for smoother target acquisition. Doesn’t alter external appearance of the gun and requires no permanent alterations. If you need to reclaim magazine capacity, simply remove the Kinetic Magazine Weight as you would an ordinary magazine plug. Available in 12 and 20 gauge models. SPECS: Aluminum, natural finish. 5″ (12.7cm) long. 12 ga. – 5.2 oz. (148g) weight. 20 ga. 4.1 oz. (115g) weight.
Add the versatility of a one -piece Picatinny scope rail to your rifle or shotgun without drilling or tapping. Precision CNC machined from lightweight, extruded 6061 T6 aluminum stock with MIL-STD 1913 Picatinny spec slot-and-rail spacing that allows fast and simple adjustment of eye relief, plus greater flexibility in scope choice. Drilled to fit the factory hole spacing. Accepts Picatinny or Weaver scope rings. Includes the correct factory specification socket head Allen screws and hex wrench. SPECS: 6061 T6 aluminum, anodized, matte black finish. Short action (S/A) and long action (L/A) models available for some rifles. Browning A-Bolt S/A 6-1⁄8″ (15.6cm) long. Browning A-Bolt L/A 6-15⁄16″ (17.6cm) long. Moss. 500/590/835 – 5 ” (14.6cm) long. Separate models for 1996 and earlier, or 1997 and later, Moss. 500/590/835 shotguns. Rem. 700 S/A – 6-1⁄8″ (15.6cm) long. Rem. 700 L/A – 6-15⁄16″ (20.2cm) long. Rem. 760 – 5 ” (13.3cm) long. Fits Remington 760, 740, and 742 rifles, Ithaca 12 gauge 37 and 87 shotguns, S&W Model 41 pistol with 7 ” barrel, and most guns drilled to accept a Weaver #62 base. Ruger 10/22 – 6 ” (16.5cm) long. Fits all factory Ruger 10/22 rifles. Sav. S/RT – 6″ (15.2cm) long. Fits Savage short action with regular trigger. Sav. S/AT – 6 ” (16.5cm) long. Fits Savage short action with AccuTrigger. Tikka T3 7-3⁄8″ (18.7cm) long.
High-tech, extreme pressure greases protect firearms from corrosion and wear, and help improve overall operation. Advanced formula will not attract dust like conventional oils and greases such as lithium, or lithium-based metallic greases containing molybdenum or graphite. Non-creeping to stay between moving parts for long lasting protection during continuous cycling. Standard is a medium viscosity grease specifically formulated for temperatures of 60deg F (16deg C) or higher. Works well in non-compensated pistols, all shotguns and rifles. Not recommended for compensated pistols, .22 rimfire, or revolvers. Lite is a thin viscosity grease formulated for temperatures 30deg F (-1deg C) or higher. Works well in non-compensated and compensated pistols, revolvers, shotguns and rifles, including .22 rimfire. Provides superior lubrication for Glock pistol connectors. Blended specifically to provide maximum reliability in all “IPSC Open guns,” carry and duty pistols. SPECS: fl. oz (15 mL) tube.
Harold A. Murtz. 1032 pages. 8 ” x 10-7/8″. Softbound. This collection of exploded view drawings is ideal for identification of parts and is an invaluable guide for disassembly and repair of rifles, shotguns and handguns. Includes 975 isometric views with parts identified by number and an easy-to-read description key. Also features a resource section containing contact information for buying gun parts and supplies. A perfect bench guide for gunsmiths, shooters and armorers.
Extra-thick, kinked, phosphor bronze wire gives the hard scrubbing action needed to cut through the toughest crud in pistol bores. You’ll have to push like the dickens, but the results will be well worth it. SPECS: Bristles: Extra-thick phosphor bronze. Shank: Steel, looped and wound. Rifle: 3 ” (8.3cm) OAL, 8-32 thread. Pistol: 2-3/8″ (6cm) OAL, 8-32 thread. Shotgun: 2-7/8″ (7.3cm) OAL, 5/16″-27 thread.
